Maintain Pallet Trucks With Midlandís Annual Inspection Programme

The regulations that make up the Health and Safety laws in the UK are a vital part of working life for many industries. Jobs that require manual labour carry much legislation to ensure the safety of employees at all times, and those who work in warehouses, factories, distribution centres and construction sites should all be well aware of these issues. One of the largest issues regarding keeping safe in the workplace is the maintenance of tools, appliances and other equipment that is used on a daily basis. Midland Pallet Trucks are a premier pallet truck supplier for many companies in the UK, and maintenance of their fleet is advised to keep them in top condition and to ensure employee safety. Their Annual Pallet Truck Inspection Programme guidelines advise the user on a series of checks designed to keep equipment operating smoothly and adhere to the Health and Safety laws laid down.

One of the first tips offered by Midland Pallet Trucks is to inspect each frame and component thoroughly for any signs of wear and tear. In such industrial environments as these pallet trucks are usually used, fracture and stress is likely, and should be reported, noted or repaired immediately. The check should include the wheels, bearings, pins, circlips and the main frame of the pallet truck itself. Wheels should be checked for dents or cracks, and never ignored if found. It may also be useful for yearly inspection reports if a record is kept of any components which are replaced.

Pallet trucks and pump trucks should be well lubricated at all times (though never the hydraulic section of a truck). Lifting chains should be cleaned regularly with thick oil, which helps to reduce clogging of parts when in use. One of the areas which should require the most attention is the bearings; they should never be left to rust or corrode. Adding a layer of grease when cleaning can help them to operate smoothly and efficiently.

For battery-operated machines such as high-lift pallet trucks, recharging the battery is a seemingly simple but vital aspect of keeping it in good condition. Water levels should never dip below around half an inch above the plate, and if the water is stale it should be replaced immediately. Letting the battery run low is detrimental to the condition of the truck, but not so much as overcharging the battery, which can damage the truck beyond repair.



Back
 
Your Basket


Nothing in your Basket.

Newsletter
Please enter your email address.
Please enter your name